Concourse HS-MP Series Manuel d'utilisateur télécharger pdf

HS-MP Series

Mounting Plate

Installation Instructions

Introduction

The HS-MP series of mounting plates are for use with the DSC Concourse Home

Systems modules and DSC Power and Maxsys security system products. The Concourse

modules and kits include the mounting plates. To install DSC security products in

Concourse cabinets one of these plates is required. A wide variety of Power and Maxsys

products can be accommodated by the three plate sizes.

Contents of Package

The package contains the following parts:

• Four HS-MP200 small plates, or

• Two HS-MP300 medium plates, or

• One HS-MP400 large plate.

Installation Instructions

1. Insert the standoffs (not supplied) into the mounting plate as per Figure A, matching

the hole pattern on the Concourse, Power or Maxsys module to be installed.

Mounting Plate

Mounting

Standoffs

Tabs

Figure A

2. Align the module over the standoffs and snap into place.

3. Locate a suitable mounting location for the module inside the cabinet.

4. Align the two mounting tabs with the holes in wire raceway and insert as per Figure B.

5. Snap the module into place by pushing the opposite side towards the back of the cabinet.

Mounting

Plate

Raceway

Tabs

Cabinet

Module

Mounting

Plate

Tabs

Raceway

Cabinet

Figure B

2000 Digital Security Controls Ltd.

Toronto, Canada

1-800-387-3630 • www.dsc.com

Printed in Canada 29005201 R001

Wiring Instructions

Follow the wiring instruction included with the Concourse, Power or Maxsys module.

Specifications

HS-MP200

Dimensions: ............................................................................................ 4” x 6”

Modules Accommodated (not limited to): Concourse – HS-NH400, HS-AH600, HS-DH800,

HS-TH200, Security – PC500, PC510, PC550, PC560, PC580, PC1555, PC1565, PC5008,

PC5100, PC5204, PC5208, PC5400, PC5401, PC5700, PC5720, PC4108, PC4216, PC4400,

PC4401, Escort4580, Escort5580, Escort5580TC, Links 2150, RL-4LC, PS3085

HS-MP300

Dimensions: ............................................................................................ 8” x 6”

Modules Accommodated (not limited to): Concourse (none)

Security – PC5108L, PC5010, PC5020, PC5908, PC5928, PC4204, PC4216, PC4702,

PC4936, SN4204, DLM-4

HS-MP400

Dimensions: .......................................................................................... 12” x 6”

Modules Accommodated (not limited to): Concourse (none)

Security – PC4020, PC4020A, PC4030A

Warranty

Digital Security Controls Ltd. warrants that for a period of 12 months from the date of purchase, the product shall be free of defects in

materials and workmanship under normal use and that in fulfilment of any breach of such warranty, Digital Security Controls Ltd. shall, at its

option, repair or replace the defective equipment upon return of the equipment to its repair depot. This warranty applies only to defects in

parts and workmanship and not to damage incurred in shipping or handling, or damage due to causes beyond the control of Digital Security

Controls Ltd. such as lightning, excessive voltage, mechanical shock, water damage, or damage arising out of abuse, alteration or improper

application of the equipment.

The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all other warranties, whether expressed or

implied and of all other obligations or liabilities on the part of Digital Security Controls Ltd. Digital Security Controls Ltd. neither assumes, nor

authorizes any other person purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or

liability concerning this product.

In no event shall Digital Security Controls Ltd. be liable for any direct, indirect or consequential damages, loss of anticipated

profits, loss of time or any other losses incurred by the buyer in connection with the purchase, installation or operation or failure

of this product.

Motion detectors can only detect motion within the designated areas as shown in their respective installation instructions. They

cannot discriminate between intruders and intended occupants. Motion detectors do not provide volumetric area protection. They

have multiple beams of detection and motion can only be detected in unobstructed areas covered by these beams. They cannot

detect motion which occurs behind walls, ceilings, floor, closed doors, glass partitions, glass doors or windows. Any type of

tampering whether intentional or unintentional such as masking, painting, or spraying of any material on the lenses, mirrors,

windows or any other part of the detection system will impair its proper operation.

Passive infrared motion detectors operate by sensing changes in temperature. However their effectiveness can be reduced when the ambient

temperature rises near or above body temperature or if there are intentional or unintentional sources of heat in or near the detection area.

Some of these heat sources could be heaters, radiators, stoves, barbeques, fireplaces, sunlight, steam vents, lighting and so on.

WARNING: Digital Security Controls Ltd. recommends that the entire system be completely tested on a regular basis. However,

despite frequent testing, and due to, but not limited to, criminal tampering or electrical disruption, it is possible for this product

to fail to perform as expected.

IMPORTANT INFORMATION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could

void the user’s authority to operate this equipment.

1 2

HS-MP Series 1
Mounting Plate 1

Résumé du contenu

Page 1 - Mounting Plate

HS-MP SeriesMounting PlateInstallation InstructionsIntroductionThe HS-MP series of mounting plates are for use with the DSC Concourse HomeSystems modu

Page 2

HS-MP SeriesMounting PlateInstallation InstructionsIntroductionThe HS-MP series of mounting plates are for use with the DSC Concourse HomeSystems modu

Commentaires sur ces manuels

Pas de commentaire

Concourse HS-MP Series Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Carte mère Concourse HS-MP Series. Concourse HS-MP Series User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels